• ProductGas Analysis
  • APK6100L
  • Liquid Standard Injector
  • Heating the liquid standard material (STD) and evaporate it. Then, it is trapped onto the sorbent tube and used for quantitative and qualitative analysis.
    If the liquid STD is injected into the sorbent tube without heating directly, the transfer line could be contaminated.
    However, it simply solve this problem with its heating function and structure.

    851277d78a12c1f0f2fb49fceefc6b09_1496726604_5794.png
  • 851277d78a12c1f0f2fb49fceefc6b09_1496727540_9033.png
     

  • Analysis Condition

    • Sampling : Flow 50ml/min, 5min

    • GC : Perkinelmer Clarus 600   

      - Detector : FID   

      - Column : VB-624 (60m x 0.53mm x 3.0㎛)   

      - Oven Temp. (Total 22min)      

                Initial Temp. : 80℃ for 1min      

                Rate : 10℃/min      

                Final Temp. : 200℃ for 5min

    • TD : APK2350   

      - First desorption : 10min   

      - Focusing Temp. : -20℃   

      - Desorption : 280℃, 5min
     


  • • Max. 200℃ on Injection port 

    • Self conditioning on transfer line

    • For sorbent tube

    • Accurate Data  


  • • Max Temp. : 200℃

    • Flow Range : Ball Flow Meter 0 ~ 200cc/min N2

    • Port : Purge Gas Inlet (N2 or He) Liquid Sample Injection Adsorption Tube(1/4" or 6mm)

    • Dimensiton : 256 x 280 x210  mm (W x D x H)

    • Power : 220 VAC, 50/60Hz 

     



    124, Sanimakgol-ro, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea (Tech Center 1301, Skn-Technopark)
    Tel. +82-31-776-0489   Fax. +82-31-776-0491   E-mail. KNR@eknr.com
    Copyrights ⓒ 2016 KNR. All rights reserved.